Video duration: 102 seconds
Global video hits: 37232
Just Meandering and tone testing,
Spontaneous,
Testing out a new Gretsch White Falson Guitar, going through a Tone King Comet 40 Amp at famed Guitar Showcase in San Jose, Calif.
A friend shot a clip for note taking ,,,
The Tone King had an amazing vintage tone with plenty of vibe!
Video duration: 336 seconds
Global video hits: 5245
Mad Professor Sky Blue Overdrive pedal demo to show how the "Z" and "TEXTURE" knobs work. Played with a Gibson Les Paul 1959 Historic with standard pickups into Normal channel of Mad Professor CS-40 amp.
Little backup delay from Mad Professor Deep Blue Delay pedal.
Video duration: 385 seconds
Global video hits: 5028
What an awesome ARF kit, E-flite did a great job. $169 I think , but add two 40amp esc, 2 ducted fan 3800kv eflite motors and 8 servos if you want to use the included retracts, or 5 if not. Tons of power with those motors and the already installed ducted fans.
Video duration: 561 seconds
Global video hits: 1011
13 plate dry cell equipped with a 30/40 amp relay and 30 amp circuit breaker. produces 1.3 LPM at 20 amps. great little cell for use in a car or truck. small 6x8x2
Video duration: 267 seconds
Global video hits: 1094
Hi Everyone :) this is a Mini Bee wing from atlanta hobby, the small brush motor was not used, and was replaced with a DonsRC wicked Motor, its a 450 outrunner with 2700kv, on a 3 cell, 1600mah 20c lipo, 40 amp ESC, 2 towerpro 9 gram servos, with a 4.75 x 4.75 apc e prop, estimated speed is about 90 mph, looking to push it to over 100mph with a Graupner 5.2 x 5.2 prop, enjoy the video, Chellie
Video duration: 387 seconds
Global video hits: 303
Flying My EasyStar Radio controlled airplane near Hastings, Minnesota with my FlyCamOne2 video/still camera mounted to the underside of the wing. The plane uses a 3,000 mAh @ 7.2 volt MaxAmps battery and a Mega Motor 16/15/3 brushless motor with an e-Flight 40 amp speed controller.
![Rattler Cutting 1/8\" & 1/4\" Steel](http://img.youtube.com/vi/EKpy1FdmpXw/2.jpg "Rattler Cutting 1/8\\" & 1/4\\" Steel")
![Steveo\](http://img.youtube.com/vi/BXBpaPpCiyw/2.jpg "Steveo\")
![Steveo\](http://img.youtube.com/vi/mpogjb3x7Wk/2.jpg "Steveo\")
